Dynamics
How can we grasp the surface of the injection mold maintenance skills
Source：http://www.dg-mold.comRelease time：2015-12-02Views：
In order to determine the state of the mold damage and repair measures. Processing enterprises should be under the injection molding machine, mold normal operation, the test mold various properties, and the final molding of plastic parts dimensions measured may be determined by the existing state of the mold that information to find out cavity, core, cooling as well as sub-surface damage to the system and other lies.
While several important parts of the mold to focus track testing: top out, the role of the guide member is to ensure that the opening and closing movement of the mold and plastic parts ejection, if any of these positions due to injuries and stuck, will lead to cut-off, it should be regularly holding mold thimble, guide post lubrication (to choose the most suitable lubricant), and regularly check thimble, guide posts and whether the deformation and surface damage, once discovered, must be promptly replaced; after the completion of a production cycle, to work on the mold surface, sports, professional guide member coated anti-rust oil, especially should pay attention to the elastic strength with gear, rack mold bearing parts and spring mold of protection to ensure that it is always in top working condition; with the production time continuous cooling channel easily deposited scale, rust, mud and algae, so that the cooling flow channel cross-section becomes smaller, the cooling channel narrowed significantly reduce the rate of heat exchange between the coolant and the mold, increasing production costs, and therefore the flow channel Attention should be paid to clean up; for hot runner mold, the maintenance of heating and control system helps prevent production faults, therefore particularly important. Thus, should all after the end of each production cycle on the mold band heaters, stick heaters, heating probes and thermocouples were measured with an ohmmeter, if damaged, must be promptly replaced, and the mold resume comparison, make a record, in order to timely identify problems and take corrective actions.
Surface of the mold maintenance can not be ignored, it directly affects the surface quality of the product, focusing on preventing corrosion, therefore, the choice of a suitable, high-quality, professional anti-rust oil is particularly important. When the mold is complete production tasks, should adopt different methods depending on the injection carefully remove residual injection molding, available copper, copper and professional mold cleaners remove residual injection mold and other deposits, then air-dried. Disable wire, steel bars and other hard objects to clean up, so as not to scratch the surface. If rust pitting corrosion caused by injection, to use grinder polishing, and professional anti-rust oil spray, and then the mold in a dry, cool, no dust at the store.
English
Chinese